Voltage Data Logger

Datalogger is designed to record 2 voltage inputs and 2 temperature inputs Pt1000.

The recording is performed in a non-volatile electronic memory. The data can be transferred to a PC via USB-C.

In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.

Technical data Value Measured value Two-state signal
Pulses BINARY INPUT   Parameters of the voltage contact „L“ level input voltage:< 0,4 V(*);
„H“ level input voltage:> 2 V;

Technical data Value Measured value Voltage
Two-state signal VOLTAGE INPUT   Measuring range 0 to 10 V DC Accuracy ±10 mV Input resistance approx.

Technical data Value Measured value Temperature
Voltage VOLTAGE INPUT   Measuring range 0 to 10 V DC Accuracy ±10 mV Input resistance approx.

Data logger is equipped with three inputs for AC current clamps and internal temperature sensor. New cost effective record of three-phase current. A practical data logger for energy audits or optimization of energy consumption. Measurement is performed without interrupting the electrical circuit. Current clamps are available in various measuring ranges up to 1000A ac.

Data logger is designed for record of voltage. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.  

Data logger is designed for record of voltage. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.